Lab 4 Data Sets for configuration G (internal and external foil) from Jeremiah McElwee and Julio Sachs.

The small fan and the big resistor were in parallel with 5V input. The current through the big resistor was 181 mA. The current through the fan was 149 mA.
The total Power input to the box was 1.65 W. (0.9 W from big resistor. 0.75 W from fan.)

The first data set shows the climb to equilibrium. After 6945 seconds, I used the ambient RTD to measure the top skin temperature from the outside.

The second data set is a measurement of the outside skin temperature on the side of the box parallel to the fans current. The first measurement is ambient.

For both of the skin temperature measurements, the RTD takes a few measurements to warm up and my hand is shaky, so there is some variation. For both of them the final value should be good. So the top skin temperature is 24.675 C. The side skin temperature is 25.714 C.